| Lampholders |
 | | LR-110 | | Molded fluorescent lampholder.
For T-8 or T-12 medium bi-pin fluorescent lamp.
Available with or without mounting screw.
Designed for use with mating lampholder cap and appropriate lamp safety shield. |
 | | LR-110C | | Pre-molded fluorescent lampholder cap.
For T-12 medium bi-pin fluorescent lamp.
Fits polycarbonate lamp safety shield with 1.625" inner DIA.
Designed for use with mating lampholder and appropriate lamp safety shield. |
 | | LR-88 | | Molded fluorescent lampholder.
For T-8 or T-12 medium bi-pin fluorescent lamps.
Available with or without mounting screw.
Designed for use with mating lampholder cap and appropriate lamp safety shield. |
 | | LR-88C | | Pre-molded fluorescent lampholder cap.
For T-12 medium bi-pin fluorescent lamp.
Fits polycarbonate lamp safety shield with 1.625" inner DIA.
Designed for use with mating lampholder and appropriate lamp safety shield. |
 | | LR-88C-8 | | Pre-molded fluorescent lampholder cap.
For T-8 medium bi-pin fluorescent lamp.
Fits polycarbonate lamp safety shield with 1.187" inner DIA.
Designed for use with mating lampholder and appropriate lamp safety shield. |
 | | LR-89 | | Molded fluorescent lampholder.
For T-8 or T-12 medium bi-pin fluorescent lamp.
Flexible wings allow for easy installation.
Available with or without mounting screw.
Designed for use with mating lampholder cap and appropriate lamp safety shield. |
 | | LR-90 | | Molded fluorescent lampholder.
For T-8 or T-12 medium bi-pin fluorescent lamp.
Contains reduced profile and cap retention lock.
Available with or without mounting screw.
Designed for use with mating lampholder cap and appropriate lamp safety shield. |
 | | LR-90-100 | | Molded fluorescent lampholder.
For T-8 or T-12 medium bi-pin fluorescent lamp.
Contains reduced profile and cap retention lock.
Available with or without mounting screw.
Designed for use with mating lampholder cap and appropriate lamp safety shield. |
 | | LR-90C | | Pre-molded fluorescent lampholder cap.
For T-12 medium bi-pin fluorescent lamp.
Contains reduced profile and lampholder retention lock.
Fits polycarbonate lamp safety shield with 1.625" inner DIA.
Designed for use with mating lampholder and appropriate lamp safety shield. |
 | | LR-90C-8 | | Pre-molded fluorescent lampholder cap.
For T-8 medium bi-pin fluorescent lamp.
Contains reduced profile and lampholder retention lock.
Fits polycarbonate lamp safety shield with 1.187" inner DIA.
Designed for use with mating lampholder and appropriate lamp safety shield. |
 | | LR-93 | | Molded fluorescent lampholder.
For T-8 or T-12 medium bi-pin fluorescent lamp.
Flexible wings allow for easy installation.
Contains reduced profile and cap retention lock.
Available with or without mounting screw.
Designed for use with mating lampholder cap and appropriate lamp safety shield. |
 | | LR-95B | | Circuit Interupting Lampholder
When mated with the LR-95C part becomes
LR-95
For use with an electronic instant ballast only. |
 | | LR-95C | | Circuit Interupting Lampholder Cap
When mated with the LR-95B part becomes the LR-95.
For use with an electronic instant start ballast only. |
 | | WB-1-1 | | Molded wedge base lampholder.
For W-2 medium wedge base lamp.
Grommet section fits panel up to 0.060" thickness.
Designed for low voltage applications. |
 | | WB-1-2 | | Molded right angle wedge base lampholder.
For W-2 medium wedge base lamp.
Grommet section fits panel up to 0.060" thickness.
Designed for low voltage applications. |
 | | WB-1-3 | | Molded wedge base lampholder.
For W-2 medium wedge base lamp.
Grommet section fits panel up to 0.060" thickness.
Designed for low voltage applications. |
 | | WB-1-4 | | Molded wedge base lampholder.
For W-2 medium wedge base lamp.
Designed for low voltage applications. |
