| Receptacles |
 | | AR-2-1 | | Molded receptacle.
NEMA 1-15R style panel mount receptacle.
For use in 15 amp 125 volt applications. |
 | | AR-2-2 | | Molded receptacle.
NEMA 1-15R style panel mount receptacle.
For use in 15amp 125 volt applications. |
 | | AR-3-2 | | Molded cord set receptacle.
NEMA 5-15R style receptacle mates NEMA 5-15P style plug.
For use in 15 amp 125 volt applications.
Approved for use with flexible service cord up to and including 14 gauge. |
 | | R-1-1 | | Molded receptacle. |
 | | R-1-1A | | Molded receptacle. |
 | | R-1-2 | | Molded grommet receptacle.
Grommet section fits panel up to 0.030" thickness and circular punched hole of 0.500" DIA. |
 | | R-1-3 | | Molded right angle receptacle for single wires. |
 | | R-1-3B | | Molded right angle receptacle for double wires. |
 | | R-1-4 | | Molded right angle receptacle for single wires. |
 | | R-1-4A | | Molded right angle receptacle for single wire. |
 | | R-1-4B | | Molded right angle receptacle for double wires. |
 | | R-1-5 | | Molded receptacle. |
 | | R-1-6 | | Molded right angle receptacle for single wires. |
 | | R-1-7 | | Molded receptacle for single wires or double wires. |
 | | R-1-8 | | Molded right angle receptacle for single wires. |
 | | R-2-1 | | Molded grommet receptacle.
Individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and oval-shaped punched hole of 0.875" length and 0.500" width. |
 | | R-2-10 | | Molded grommet receptacle.
Individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and rectangular punched hole of 1.000" length and 1.000" width. |
 | | R-2-11 | | Molded right angle receptacle.
Designed for use as miniature fan connector. |
 | | R-2-13 | | Molded receptacle.
Also available with each terminal rotated 90° from position shown.
Designed for use as temperature control connector. |
 | | R-2-13A | | Molded receptacle.
Also available with each terminal rotated 90° from position shown.
Designed for use as temperature control connector. |
 | | R-2-15 | | Molded grommet receptacle.
Extended face offers moisture resistance.
Grommet section fits panel up to 0.040" thickness and D-shaped punched hole of 0.625" DIA and 0.560" height. |
 | | R-2-16 | | Molded cord set receptacle.
NEMA 1-15R style receptacle mates NEMA 1-15P style plug.
For use in 13 amp 125 volt applications.
Approved for use with flexible service cord up to and including 16 gauge. |
 | | R-2-16P | | Molded cord set receptacle.
NEMA 1-15R style receptacle mates NEMA 1-15P style plug.
For use in 13 amp 125 volt applications.
Approved for use with flexible service cord up to and including 16 gauge. |
 | | R-2-17 | | Molded receptacle.
Individual moisture seals offer moisture resistance. |
 | | R-2-18 | | Molded receptacle.
Individual moisture seals offer moisture resistance. |
 | | R-2-19 | | Molded receptacle.
Individual moisture seals offer moisture resistance. |
 | | R-2-1A | | Molded grommet receptacle.
Individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and oval-shaped punched hole of 0.875" length and 0.500" width. |
 | | R-2-2-075 | | Molded receptacle.
Recessed face offers moisture resistance. |
 | | R-2-2-100 | | Molded receptacle.
Recessed face offers moisture resistance. |
 | | R-2-3 | | Molded receptacle.
Individual moisture seals offer moisture resistance. |
 | | R-2-30 | | Molded receptacle.
Recessed face tapered to offer moisture resistance. |
 | | R-2-31 | | Molded receptacle.
Designed for use as miniature fan connector. |
 | | R-2-33 | | Molded grommet receptacle.
Recessed face offers moisture resistance.
Grommet section fits panel up to 0.030" thickness and elliptical punched hole of 0.625" length and 0.530" width. |
 | | R-2-35 | | Molded receptacle.
Flexible connection web allows terminal spacing to vary between 0.530" and 0.600".
Also available with each terminal rotated 90° from position shown.
Designed for use as temperature control connector. |
 | | R-2-35A | | Molded receptacle.
Flexible connection web allows terminal spacing to vary between 0.400" and 0.830".
Also available with each terminal rotated 90° from position shown.
Designed for use as temperature control connector. |
 | | R-2-35B | | Molded receptacle.
Flexible connection web allows terminal spacing to vary between 0.400" and 0.830".
Also available with each terminal rotated 90° from position shown.
Designed for use as temperature control connector. |
 | | R-2-36 | | Molded receptacle.
Supported by mounting tab with countersunk 0.187" DIA mounting hole.
Recessed face tapered to offer moisture resistance. |
 | | R-2-37P | | Molded right angle receptacle.
Flexible connection web allows terminal spacing to vary between 0.500" and 0.600".
Designed for use as lamp socket connector. |
 | | R-2-37P-1 | | Molded right angle receptacle.
Flexible connection web allows terminal spacing to vary between 0.500" and 0.600".
Designed for use as lamp socket connector. |
 | | R-2-37PM | | Molded right angle receptacle. |
 | | R-2-38 | | Molded receptacle.
Individual moisture seals offer moisture resistance. |
 | | R-2-39 | | Molded receptacle.
Recessed face tapered to offer moisture resistance. |
 | | R-2-41 | | Molded receptacle.
Flexible connection web allows terminal spacing to vary between 0.400" and 0.600".
Designed for use as temperature control connector. |
 | | R-2-41A | | Molded receptacle.
Flexible connection web allows terminal spacing to vary between 0.400" and 0.600".
Designed for use as temperature or valve control connector. |
 | | R-2-42 | | Molded receptacle.
Flexible connection web allows terminal spacing to vary between 0.400" and 0.560".
Designed for use as temperature control connector. |
 | | R-2-45 | | Molded right angle receptacle.
Designed for use as temperature control connector. |
 | | R-2-46 | | Molded right angle receptacle |
 | | R-2-49 | | Molded right angle grommet receptacle.
Grommet section fits panel up to 0.060" thickness and oval-shaped punched hole of 0.850" length and 0.500" width. |
 | | R-2-5 | | Molded receptacle.
Individual moisture seals offer moisture resistance. |
 | | R-2-50 | | Molded right angle grommet receptacle.
Grommet section fits panel up to 0.080" thickness and oval-shaped punched hole of 0.625" length and 0.480" width. |
 | | R-2-58 | | Molded receptacle |
 | | R-2-59 | | Molded receptacle. |
 | | R-2-6 | | Molded receptacle.
Flexible connection web allows terminal spacing to vary between 0.530" and 0.600".
Also available with each terminal rotated 90° from position shown.
Designed for use as temperature or valve control connector. |
 | | R-2-8 | | Molded receptacle.
Individual moisture seals offer moisture resistance. |
 | | R-3-1 | | Molded grommet receptacle.
Individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and oval-shaped punched hole of 0.875" length and 0.500" width. |
 | | R-3-10A | | Molded right angle grommet receptacle.
Individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and oval-shaped punched hole of 0.875" length and 0.500" width. |
 | | R-3-10B | | Molded right angle grommet receptacle.
Individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and oval-shaped punched hole of 0.875" length and 0.500" width. |
 | | R-3-11 | | Molded right angle grommet receptacle.
Extended face offers moisture resistance.
Grommet section fits panel up to 0.050" thickness and D-shaped punched hole of 0.625" DIA and 0.580" height. |
 | | R-3-1A | | Molded grommet receptacle.
Individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and oval-shaped punched hole of 0.875" length and 0.500" width. |
 | | R-3-20-060 | | Molded right angle grommet receptacle.
Extended face offers moisture resistance.
Grommet section fits panel up to 0.060" thickness and D-shaped punched hole of 0.625" DIA and 0.560" height. |
 | | R-3-20-125 | | Molded right angle grommet receptacle.
Extended face offers moisture resistance.
Grommet section fits panel up to 0.125" thickness and D-shaped punched hole of 0.625" DIA and 0.560" height. |
 | | R-3-20A | | Molded right angle grommet receptacle.
Extended face offers moisture resistance.
Grommet section fits panel up to 0.125" thickness and D-shaped punched hole of 0.625" DIA and 0.560" height. |
 | | R-3-23A | | Molded grommet receptacle.
Recessed face and individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and rectangular punched hole of 1.000" length and 1.000" width.
Contains dummy cap to electrically insulate and protect receptacle when not in use. |
 | | R-3-24 | | Molded right angle receptacle.
Terminals arranged with 0.690" DIA delta configuration.
Also available with delta configuration rotated in 60° increments.
Designed for use as compressor connector. |
 | | R-3-24AM | | Molded right angle receptacle.
Terminals arranged with 0.840" DIA delta configuration.
Also available with delta configuration rotated in 60° increments.
Designed for use as compressor connector. |
 | | R-3-24C | | Molded right angle receptacle.
Terminals arranged with 0.690" DIA delta configuration.
Designed for use as compressor connector. |
 | | R-3-26 | | Molded grommet receptacle.
Recessed face and individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and rectangular punched hole of 1.000" length and 1.000" width. |
 | | R-3-29 | | Molded right angle grommet receptacle.
Recessed face and individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and rectangular punched hole of 1.000" length and 1.000" width. |
 | | R-3-3 | | Molded grommet receptacle.
Individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and rectangular punched hole of 1.000" length and 1.000" width. |
 | | R-3-30-075 | | Molded receptacle.
Individual moisture seals offer moisture resistance. |
 | | R-3-30-100 | | Molded receptacle.
Individual moisture seals offer moisture resistance.
Designed for use with appropriate mating connector and mechanical locking device. |
 | | R-3-31 | | Molded grommet receptacle.
Recessed face offers moisture resistance.
Grommet section fits |
 | | R-3-33 | | Molded right angle grommet receptacle.
Recessed face offers moisture resistance.
Grommet section fits panel up to 0.060" thickness and rectangular punched hole of 1.000" length and 1.000" width.
Contains dummy cap to electrically insulate and protect receptacle when not in use. |
 | | R-3-35 | | Molded Receptacle |
 | | R-3-35M | | Molded Receptacle |
 | | R-3-3A | | Molded grommet receptacle.
Individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and rectangular punched hole of 1.000" length and 1.000" width. |
 | | R-3-4-075 | | Molded receptacle.
Recessed face offers moisture resistance. |
 | | R-3-4-100 | | Molded receptacle.
Recessed face offers moisture resistance. |
 | | R-3-44 | | Molded Receptacle |
 | | R-3-48 | | Molded Receptacle. |
 | | R-3-5 | | Molded grommet receptacle.
Individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and rectangular punched hole of 1.000" length and 1.000" width. |
 | | R-3-6 | | Molded grommet receptacle.
Extended face offers moisture resistance.
Grommet section fits panel up to 0.040" thickness and D-shaped punched hole of 0.625" length and 0.560" height. |
 | | R-3-6A | | Molded grommet receptacle.
Extended face offers moisture resistance.
Grommet section fits panel up to 0.050" thickness and D-shaped punched hole of 0.625" length and 0.560" height. |
 | | R-3-7 | | Molded grommet receptacle.
Shrouded face offers moisture resistance.
Grommet section fits panel up to 0.060" thickness and oval-shaped punched hole of 1.300" length and 0.375" width. |
 | | R-3-8 | | Molded receptacle.
Supported by 0.187" DIA mounting hole.
Recessed face tapered to offer moisture resistance. |
 | | R-3-9 | | Molded grommet receptacle.
Recessed face offers moisture resistance.
Grommet section fits panel up to 0.030" thickness and elliptical punched hole of 0.625" length and 0.530" width. |
 | | R-4-1 | | Molded receptacle.
Individual moisture seals offer moisture resistance. |
 | | R-4-10 | | Molded grommet receptacle.
Recessed face and individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and rectangular punched hole of 1.000" length and 1.000" width. |
 | | R-4-11 | | Molded grommet receptacle.
Individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and rectangular punched hole of 0.875" length and 0.500" width. |
 | | R-4-13 | | Molded receptacle.
Individual moisture seals offer moisture resistance. |
 | | R-4-14 | | Molded receptacle.
Shrouded terminals offer protection during installation.
Designed for use as modular motor connector. |
 | | R-4-2 | | Molded receptacle.
Designed for use as mechanical timer control. |
 | | R-4-5 | | Molded grommet receptacle.
Recessed face and individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and oval-shaped punched hole of 1.400" length and 0.687" width. |
 | | R-4-7 | | Molded receptacle.
Supported by (2) 0.187" DIA mounting holes.
Individual moisture seals offer moisture resistance. |
 | | R-4-9 | | Molded receptacle.
Individual moisture seals offer moisture resistance. |
 | | R-5-1 | | Molded receptacle.
Individual moisture seals offer moisture resistance. |
 | | R-5-2 | | Molded grommet receptacle.
Recessed face and individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and rectangular punched hole of 1.000" length and 1.000" width. |
 | | R-5-3 | | Molded grommet receptacle.
Individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and oval-shaped punched hole of 0.875" length and 0.500" width. |
 | | R-5-4 | | Molded right angle grommet receptacle.
Individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and oval-shaped punched hole of 0.875" length and 0.500" width. |
 | | R-5-7 | | Molded right angle grommet receptacle.
Recessed face and individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and rectangular punched hole of 1.030" length and 1.030" width.
Contains dummy cap to electrically insulate and protect receptacle when not in use.
For use as lamp current interrupter. |
 | | R-5-8 | | Molded grommet receptacle.
Recessed face and individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and rectangular punched hole of 1.030" length and 1.030" width.
Contains dummy cap to electrically insulate and protect receptacle when not in use.
For use as lamp current interrupter. |
 | | R-5-9 | | Molded right angle grommet receptacle.
Recessed face and individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and rectangular punched hole of 1.030" length and 1.030" width.
Contains dummy cap to electrically insulate and protect receptacle when not in use.
For use as lamp current interrupter. |
 | | R-5-9A | | Same as R-5-9 with a polypropylene tower insert. |
 | | R-6-1 | | Molded Receptacle |
 | | R-6-3 | | Molded Receptacle |
 | | R-7-1 | | Molded grommet receptacle.
Recessed face and individual moisture seals offer moisture resistance.
Grommet section fits panel up to 0.060" thickness and rectangular punched hole of 1.000" length and 1.000" width. |
 | | R-8-1 | | Molded receptacle.
Terminals arranged with 0.690" DIA circular configuration.
Designed for use as standard 8 pin octal socket connector. |
 | | R-9-1 | | Molded receptacle.
Individual moisture seals offer moisture resistance.
Designed for use as electronic ballast connector. |
